bryan28
Senior Member
- Joined
- Apr 28, 2015
- Posts
- 1,060
- Reaction score
- 544
- Location
- Tullahoma, TN
- Ram Year
- 2020 Laramie CC 4x4
- Engine
- 5.7 Hemi
If I install a set on front set at 2.1" will I need an alignment afterwards?
alignment with bilstiens?
- Thread starter bryan28
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yes, because it changes the geometry of the front end. Doesn't cost much to get it done
OP
OP
bryan28
Senior Member
- Joined
- Apr 28, 2015
- Posts
- 1,060
- Reaction score
- 544
- Location
- Tullahoma, TN
- Ram Year
- 2020 Laramie CC 4x4
- Engine
- 5.7 Hemi
Thanks
darendeath
Member
- Joined
- May 24, 2015
- Posts
- 45
- Reaction score
- 3
- Ram Year
- 2014
- Engine
- V6
I haven't had my alignment yet. Was told it wasn't needed with the shocks, but would be with spacer to levels.
I'm getting new wheels and then I'll do alignment.
I'm getting new wheels and then I'll do alignment.
brandonjansen
Senior Member
- Joined
- Feb 14, 2013
- Posts
- 1,701
- Reaction score
- 1,020
- Location
- Abbotsford, BC, Canada
- Ram Year
- 2012 Ram 3500 Laramie Limited
- Engine
- 6.7 Cummins - Tuned and Deleted
Someone lied to you then. You most definitely do need an alignment with Bilsteins as you've changed the whole geometry of the front end. Right now your tires will be towed in and you'll have positive camber. You don't need to wait for new wheels for an alignment... it can be done regardless of what wheels and tires are on the truck.
