erice
Member
- Joined
- Mar 26, 2015
- Posts
- 42
- Reaction score
- 2
- Ram Year
- 2013 ram 1500 slt
- Engine
- 4.7
I just received the backup camera today and installed the complete harness
and camera
last thing to do, install the pins in the back of the radio harness
the problem is that the pins are way to large and could not fit into the slots
anybody now what pins I should buy or I am just dum and cant put a large rectangle in a smaller hole
also there are 3 extra wires yellow,blue.....
on a video he used the 3 wires but in the instructions it said to use the gray/blue, gray/orange and bare
so is yellow not used
purple for show you turning?
2013 ram 1500
r2 radio
already had it flashed and ready to go
and camera
last thing to do, install the pins in the back of the radio harness
the problem is that the pins are way to large and could not fit into the slots
anybody now what pins I should buy or I am just dum and cant put a large rectangle in a smaller hole
also there are 3 extra wires yellow,blue.....
on a video he used the 3 wires but in the instructions it said to use the gray/blue, gray/orange and bare
so is yellow not used
purple for show you turning?
2013 ram 1500
r2 radio
already had it flashed and ready to go
