Bora spacers ?'s

[mxerchris]

Looking for input on spacers I'm going to get the Bora spacers for my 2012 Longhorn 4x4 probably from ebay and the listing is for 2-1.5" and 2-1.75" spacers, my question is do the 1.75" ones go on the back to even out the look?
Also will the 1.5" be thick enough to clear the factory studs or will have to trim?

Thanks!

 

[Solid State]

Just ordered a set from MT. I believe Lenny said factory studs are 1 9/16. It will depend on your wheels to wether you will need to trim. Some have a little pocket at the back. If they don't, you'll have to take off the little nub at the end ofthe factory studs. Also, dont know what kinda deal ur getting on ebay, but i might just order a set from Motorsports Tech. Each set is custom made.

 

[brandonjansen]

On a 4wd truck the rear track is typically 1" narrower than the front track. So 1/2" per side. Most people don't even worry about it as it's not a big deal. I've never seen anyone buy staggered spacers for a 4wd Ram to compensate. As Solid State said above, unless you're getting a really good deal from the ebay listing I'd recommend ordering directly from Motorsport Tech to ensure you're getting what you need.

And yes, the 1.5" spacers will clear your stock studs.

 

[mxerchris]

the Ebay listing is for Bora spacers, it appears to be Motorsport Tech's Ebay store?

 

[xrsman]

Like Brandon said, I'd buy directly from motosport tech. I had 1.5's on my 2014 Longhorn, they cleared the studs no problem.

Sent from my SM-G930W8 using Tapatalk