99ramdyllan
Member
The trim of my front bumper is coming off on the corner's and i was wondering could i buy new clips and pop them in it, or do i need new trim for it?
bumper trim
- Thread starter 99ramdyllan
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Okiespaniel
Senior Member
- Joined
- Dec 18, 2011
- Posts
- 1,645
- Reaction score
- 898
- Location
- Work, Shop, Computer
- Ram Year
- 2000
- Engine
- magnum, 5.9
The clips are molded into the trim so once they start breaking or breaking off, youhave to buy a new trim piece.
Ebay is your friend!
Ebay is your friend!
OP
OP
99ramdyllan
Member
thanks for the help, but in a way it makes it easier for me since i was planning on taking it off and painting it black!
Micchi
Senior Member
How is the trim held on? If it just pushes in and locks be careful when replacing. You'll need a rubber mallet and make sure you start from the center and work your way out.
markat
Junior Member
- Joined
- Feb 3, 2012
- Posts
- 24
- Reaction score
- 0
- Location
- Rhode Island
- Ram Year
- 1997. Many mods. New leafs 5/1, CAI, Heddmans, magflo exhaust, pioneerAVH-p6300, bilsteins,
- Engine
- 5.9L
Some of the clips need to be pinched and hit to remove. I have repaired a few with epoxy but sometimes they are to far gone (brittle). 2 sided 3M tape, sometimes in layers is a quick fix. Im not sure how long mine will last.
ram15
Senior Member
are you plannig on taking the trim off and painting the metal part of the bumper black. if you are you might have to bondo a few holes. id like to see it when your finished.
