bumper trim

[99ramdyllan]

The trim of my front bumper is coming off on the corner's and i was wondering could i buy new clips and pop them in it, or do i need new trim for it?

 

[Okiespaniel]

The clips are molded into the trim so once they start breaking or breaking off, youhave to buy a new trim piece.
Ebay is your friend!

 

[99ramdyllan]

thanks for the help, but in a way it makes it easier for me since i was planning on taking it off and painting it black!

 

[Micchi]

How is the trim held on? If it just pushes in and locks be careful when replacing. You'll need a rubber mallet and make sure you start from the center and work your way out.

 

[markat]

Some of the clips need to be pinched and hit to remove. I have repaired a few with epoxy but sometimes they are to far gone (brittle). 2 sided 3M tape, sometimes in layers is a quick fix. Im not sure how long mine will last.

 

[ram15]

are you plannig on taking the trim off and painting the metal part of the bumper black. if you are you might have to bondo a few holes. id like to see it when your finished.