Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Question for those that have done this mod.
I did mine today and all went fine cutting the "T" shape out. The only thing is that the cover doesn't seem to "latch"
It seats nice and flush and can't go ant further, but I can pull it right off without pressing the tabs on the latch.
Anyone else have this problem?
Ray
Question for those that have done this mod.
I did mine today and all went fine cutting the "T" shape out. The only thing is that the cover doesn't seem to "latch"
It seats nice and flush and can't go ant further, but I can pull it right off without pressing the tabs on the latch.
Anyone else have this problem?
Ray
I did this tonight after dinner. It took me about 15 minutes to cut the T and a few more to deal with the door. Mine did not latch either. I will fool around with it more tomorrow.
The MOPAR filter I ordered had the same air flow arrow directions as the door. Easy.
Just did my install and it fits perfect. This is what I ordered: '10-'12 Dodge Ram Cabin Air Filter Kit-Geno's Garage
Finally got the parts and just got done. Easy to do and makes me feel better that the air is filtered now.
One question what is the white accordion thing on top of the airbox. It was down at one point and then lifted up mechanically and stayed up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
A box from Genos showed up today! I'm taking care of this tomorrow! Gonna have some clean air in the cab of my Ram starting tomorrow!
I'm going to take lots of pictures, post them here and see what everyone thinks.
still pissed a truck with a $50k sticker price doesn't have the filter from the factory.