Can you guys help me with identifying a lift?

[drprymer]

I just purchased my first Ram Saturday and I love it so far. Only problem is it is lifted and I'm just trying to figure out what exactly I have on it so I know what to remove. I don't do the whole lifted scene but the price was right. Its got 275/65r20 tires and center of hub to fender lip measurement is 25.75" if that helps. Thanks in advance!

 

[Dantheman]

Maxtrac 4.5/3"? Something along those lines I believe

 

[ram1500rsm]

Unfortunately for you the changes might not be reversible, at least not the plug and way way. If i was you i'll upgrade the wheels and get the truck some 35's, will look great, and you won't have to thinker with the lift, if it rides good and drive srtraight, why would you want to lower it ? i'm not a friend of the brackets and the cuts to get the elevation, but since you have it done already, might as well enjoy it.

 

[JB1]

I’m not familiar with the 2wd lifts, are they not reversible?.....I thought the cutting was for the front diff clearance on 4x4

 

[drprymer]

Nah lifting serves 0 purpose to me. A good 5/7 drop will make this perfect. Basically are these lift spindles on the front? because everything else on the back looks to be just brackets added.

 

[Dantheman]

This should be easily reversible. 4 and 6" lifts with the added front cross members and diff drop require the cutting like JB1 mentioned but assuming this is 2wd (which the lack of cv axles in the pics is telling me) everything is just swapped in. Those are aftermarket knuckles, factory are cast. You should be okay to take everything off once you get a drop in. If you are planning on dropping that far (dont quote me because I dont know much about it) wont you need new knuckles? In the rear all you need to do is take that trac bar bracket and sway bar/brake line drop brackets out, along with the springs obviously. In the front, I believe you just need to remove those knuckles and whatever spacer is on top of the coil. I'm by no means knowledgeable in 2wd trucks so hopefully somebody else can add to this.

 

[JB1]

Nah lifting serves 0 purpose to me. A good 5/7 drop will make this perfect. Basically are these lift spindles on the front? because everything else on the back looks to be just brackets added.

This is what you need

https://www.ramforum.com/threads/2018-hyrdo-blue-2wd-lowered-w-inez-4-6-kit.122652/

 

[drprymer]

I already had that saved before i purchased a ram haha

 

[drprymer]

Found out it's a Maxtrack 4.5/3!

 

[ram1500rsm]

Didn't see the lack of front CV's, and i don't know crap about 2wd lift's either

 

[JB1]

Found out it's a Maxtrack 4.5/3!

There you go @Dantheman called it