Cargo bed divider; using the extended bed

[TRK_GANG74]

Mine were missing on my 19 Laramie Longhorn so I found a set on Amazon and I’m good to go.

 

[Farmer Fran]

I'm in Canada, so this link will be for a .ca instead of .com version, but I suspect can be found in the US. This covers what you need for both sides.

https://www.amazon.ca/gp/product/B092LJTNHC/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

These were a fraction of the price of what the dealer wanted. Simple install - pry of the plastic covers and screw these into the pre-threaded holes.

Works perfectly for my 2020 Laramie.

Whoa, these are $25 USD on Amazon. Thanks for the link.

 

[dbalder000]

OK Folks I just bought a 2026 Ram 1500 and I bought the Bolts listed here through amazon for the Plastic Divider / Bed extender (I actually bought 2 different sets).. The bottom bolts fit perfect but the top bolt are either a litte too big or the thread count is wrong.. Has anyone seen this issue? I can power driver them in but I'd rather not.. Like someone else said - the Ram parts department doesn't even show an accurate pic of my bed config... Very odd

 

[mikeru]

OK Folks I just bought a 2026 Ram 1500 and I bought the Bolts listed here through amazon for the Plastic Divider / Bed extender (I actually bought 2 different sets).. The bottom bolts fit perfect but the top bolt are either a litte too big or the thread count is wrong.. Has anyone seen this issue? I can power driver them in but I'd rather not.. Like someone else said - the Ram parts department doesn't even show an accurate pic of my bed config... Very odd

This is why I bought them from from a Ram dealership for all three trucks that I've installed them on. I knew they would fit.

 

[PdPuNOme]

OK Folks I just bought a 2026 Ram 1500 and I bought the Bolts listed here through amazon for the Plastic Divider / Bed extender (I actually bought 2 different sets).. The bottom bolts fit perfect but the top bolt are either a litte too big or the thread count is wrong.. Has anyone seen this issue? I can power driver them in but I'd rather not.. Like someone else said - the Ram parts department doesn't even show an accurate pic of my bed config... Very odd

Similiar for me on a 22 but it was just one out of the 4. I had to retap the threads. To me it seemed at the plant ram had an issue during manufacturing like human error or the robot glitched. May just be some random 1 in a million defect. I installed the amazon set but I do not blame that as it was the truck that was the issue. All threads on the amazon kit matched each other and the 3 other holes on the truck.