Center Console Chrome Painted

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CharlieTheTexan

Junior Member
Joined
Jun 28, 2021
Posts
5
Reaction score
3
Location
Odessa, TX 79761, USA
Ram Year
2012
Engine
6.7L Cummins High Output Diesel
Hey, everyone. My name is Charles, and this is my first post here.
I recently acquired my first 2012 RAM 2500 Longhorn. I've had other RAMs for work use, as well as a 2011 RAM 1500 ST, but never a nice diesel RAM truck of my own. So, I was quite thrilled to find one with only 128k miles and in good condition. If you can see my profile picture, that's the truck.
Anyway, I'd heard that these center console rings (on the full center console) have been a huge pain for other people. But I shrugged it off, "No biggie, probably won't be a problem for me."
And wouldn't you know it... I was dead wrong. Within the first 3 or 4 days, I had a high sunbeam pass through the top of windshield, bounce off that ring of death, and blind me. But losing vision while driving doesn't work for the safety of myself and of the general public. So, I fixed it.
My before and after pictures are posted below, and I'd say it turned out well; the work has held up so far, with no more blinding effects at all... not even a glossy finish!
With all that said, I had to use some different products than what this other guy used [EDIT: THEY KEEP REMOVING MY LINK, BUT IT IS ON THE CUMMINS FORUM WEBSITE, YOU CAN GOOGLE THAT INFO]. I also posted pictures of those products, with a number in the order I used them.

Just FYI: The before picture is when the truck was first acquired at the dealership. The trash and other things in there belong to previous owner. Keeping my stuff taken care of is how it lasts, so I'm giving extra effort with this old workhorse. Plus... who actually likes their vehicles to look gross and smell bad?
 

Attachments

  • 20210529_124847.jpg
    20210529_124847.jpg
    88.5 KB · Views: 71
  • 20210704_183233.jpg
    20210704_183233.jpg
    116.2 KB · Views: 70
  • 20210801_002352.jpg
    20210801_002352.jpg
    108.7 KB · Views: 48
  • 20210801_002643.jpg
    20210801_002643.jpg
    113.7 KB · Views: 45
Last edited:

Wahrsuul

Senior Member
Joined
Nov 16, 2011
Posts
2,779
Reaction score
8,613
Location
Central S.C.
Ram Year
2019
Engine
Hemi 5.7
Nice job. I'm doing much the same thing to my '09. Just can't figure out how to get the chrome trim from around the shift handle. Not the little round side things, but the stuff around the "shift pattern" I guess. Hate to have to disassemble the shifter.

Are you going to do the trim around the vents?
 
Back
Top