dnddistributors
Junior Member
2010 1500 5.7 Hemi Check Engine Light Code P0308- Exhaust Manifold Studs warped #8 misfire. Anyone with experience with same issue? Solution Cost Estimate!
Last edited:
Check Engine Light - Exhaust Manifold Studs warped #8 misfire.
- Thread starter dnddistributors
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wirerat
Senior Member
I just delt with a warped manifold. 2 broken bolts had to be extracted. At the advice of the shop, I had shorty headers installed. Labor, arp bolts and remflex gaskets was $700 + $350 for the headers. Local shop price, so it can vary.
I saved my old manifolds. I plan to resurface them and reinstall if these bbk headers give me any issues. I am aware these shorty's are not the highest quality but they don't snap the bolts. Which means I can deal with them myself down the road.
Never had a cylinder miss fire. Truck ran great before and after repair.
I saved my old manifolds. I plan to resurface them and reinstall if these bbk headers give me any issues. I am aware these shorty's are not the highest quality but they don't snap the bolts. Which means I can deal with them myself down the road.
Never had a cylinder miss fire. Truck ran great before and after repair.
Last edited:
CamperMike
Senior Member
Misfire might be the cam and probably has nothing to do with the manifold issue.
