Chutoyy
Junior Member
Hello all from the South Seattle-ish area! Recently picked up a Ram 2500 6.7 and found this forum. Just wanted to thank all of those that have contributed to the AlfaOBD project; I can hardly wait for the cable to get my TPMS and LED data changed. Also, creating this intro thread because I've been poking around the classifieds w/ 0 posts and wanted to put some sellers at ease...
Anyway, a few pics.
Now I have another engine concept to learn.
Quite a boring grey garage...
Used Amazon sourced Beamtech LED H11 set w/o the need for Canbus resistor/capacitor contraptions... Except for the leftover LED signal bulbs for now. This glare is terrible; but can't be as bad as everyone driving around w/ high beams on. :F
And for those lighting lawyers. Yes, I do understand the difference between PNP HIDs and Projectors....
Anyway, a few pics.
Now I have another engine concept to learn.
Quite a boring grey garage...
Used Amazon sourced Beamtech LED H11 set w/o the need for Canbus resistor/capacitor contraptions... Except for the leftover LED signal bulbs for now. This glare is terrible; but can't be as bad as everyone driving around w/ high beams on. :F
And for those lighting lawyers. Yes, I do understand the difference between PNP HIDs and Projectors....