Trying to program before I hook back up to computer for second key2go step.
I have gone through the first stage of flashing on the computer. My next step was to take it outside and plug my harness into the truck then plug in the unit (black,red,blue) red light comes on . I next did as said and turned key to ignition then off x2 . When on ign it started to flash red then when off it went solid red and never went orange. I tried to hook it up to my pc again and it could not go to next step . So I plugged it back into the truck and it just continually did 3 red flashes pause 3 red flashes. So o cleared it programming (not the software or flash) by plugging in black then red holding down button then plugging in blue went orange 3 seconds then I let go went to red. Tried steps over of turning key x2 and back to red 3 flashes
I have gone through the first stage of flashing on the computer. My next step was to take it outside and plug my harness into the truck then plug in the unit (black,red,blue) red light comes on . I next did as said and turned key to ignition then off x2 . When on ign it started to flash red then when off it went solid red and never went orange. I tried to hook it up to my pc again and it could not go to next step . So I plugged it back into the truck and it just continually did 3 red flashes pause 3 red flashes. So o cleared it programming (not the software or flash) by plugging in black then red holding down button then plugging in blue went orange 3 seconds then I let go went to red. Tried steps over of turning key x2 and back to red 3 flashes