- Joined
- Apr 13, 2015
- Posts
- 1,066
- Reaction score
- 460
- Ram Year
- 2006
- Engine
- Hemi 5.7
Absolutely send me a PMCan we communicate offline? Based on my answers to your questions, can I get some specific recommendations?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Absolutely send me a PMCan we communicate offline? Based on my answers to your questions, can I get some specific recommendations?
Not an expert but just adding my 2c.....
"Fit" and "usable" are 2 different things.. Is it a grocery getter or are you running it offroad?
I see guys that have fit 37's (or what ever oversized tire) on trucks but they are so stuffed they hit the fender pulling into the parking lot. I'd never venture offroad like that.
Just something to consider when people claim they fit. (though I do trust Thuren's opinion) I personally wouldn't run them without a little lift but that's me.
.
Have you checked this video out yet?
You beat me to my own video!!
It was that video that convinced me to go with 37's. I previously ran 35's. Running AEV Katlas and Toyo Open Country MT 37x13.50, only rubs the sway bar at full lock.
I’m probably going to go with BFG KO2, 37”x12.5”. Not sure if I’ll stay with stock wheels or not. I’d like to go to 8.5” width versus the stock 8” width.Would be a touch less with the 12.50 - but glad the video was helpful. It's a great combo.
I’m probably going to go with BFG KO2, 37”x12.5”. Not sure if I’ll stay with stock wheels or not. I’d like to go to 8.5” width versus the stock 8” width.
Good to know. Thanks.37's on stock power wagon wheels look great, IMO. You may have to find a shop that will mount them though. I had two local places (franchises, not mom and pop shops) tell me they wouldn't mount 37's on 8" wide wheels.
My dealer actually said they would mount them though.
Any pics of your setup? I don't think I've seen a PW with those meaty MT Toyos....width spec is 14.6" wide! They should label them as 14.5's, their 37x12.50 are spec'd at 12.5.It was that video that convinced me to go with 37's. I previously ran 35's. Running AEV Katlas and Toyo Open Country MT 37x13.50, only rubs the sway bar at full lock.
37's on stock power wagon wheels look great, IMO. You may have to find a shop that will mount them though. I had two local places (franchises, not mom and pop shops) tell me they wouldn't mount 37's on 8" wide wheels.
My dealer actually said they would mount them though.
Any pics of your setup? I don't think I've seen a PW with those meaty MT Toyos....width spec is 14.6" wide! They should label them as 14.5's, their 37x12.50 are spec'd at 12.5.
Welcome to the forum Sando! I can't see the pics on my end.Here are a few that I took at the office today. Sorry, no dirt pics yet, need to get to South Texas and see what the new shoes can do.
I am new at this forum, so I hope the pics post
Great looking rig Sando! Those meaty Toyo 37's really fill out the wheel wells. I like those wheels since the center cap is built in to the wheel to give it an OEM look.
FYI - I decided to pull the trigger on purchasing some AEV Katla wheels so I did. Good timing too because right now AEV has a promotion going on that if you buy 4 wheels, they'll give you a 5th wheel for free. So I got 5 for 4 plus free shipping. Not sure how long the promotion runs, but looks like it just started in May.
Just when I thought I had made my mind on some BFG KM3s you post these monster tires. How's the noise level. They also look a little bigger than some of the other 37s I've seen on pictures. Do you have an actual height/width of these installed on the truck? How's the tire poke-out with the 14+" width?