Driving me crazy!!

[Jdperry]

Yeah, -44 x12s seem to be out there quite a ways, I dont think I would like that wide being that low. Thanks for the input.

I'm running the exact wheels you're looking at getting. 20x10 -24 Moto 970. I'm running 35/12.5 with a stretched 6" lift though.

 

[RMI22]

Sweet, any pics? I just ordered a set of 295 65 20 Toyo MTs, ordered my bilstein 5100s earlier, Im just gonna run the bilsteins and stock wheels with the 295s for now and get 20x10s when I do my 6", probably going to go with Zone.

Any input on this plan from anyone?

 

[Jdperry]

Sweet, any pics? I just ordered a set of 295 65 20 Toyo MTs, ordered my bilstein 5100s earlier, Im just gonna run the bilsteins and stock wheels with the 295s for now and get 20x10s when I do my 6", probably going to go with Zone.

Any input on this plan from anyone?

You'll be running pretty much the EXACT setup as me. I have the zone 6" with 5" rear and bils set at 2.8 with mevotech UCA's.

 

[RMI22]

Nice, do you have any complaints with that setup?

 

[Jdperry]

Nice, do you have any complaints with that setup?

No complaints at all. Here's a link to where I posted a pic. Post number #639

http://www.ramforum.com/f40/lifted_4th_gen_pics_-_show_em_off-50892/index64.html

 

[Jdperry]

Another pic in this thread. Post #7260

http://www.ramforum.com/f38/what_did_you_do_your_4th_gen_week-34480/index726.html

 

[RMI22]

That looks awesome. Probably going to end up making me do that when I'm ready to buy new wheels lol. Thanks for the pics!

 

[Jdperry]

That looks awesome. Probably going to end up making me do that when I'm ready to buy new wheels lol. Thanks for the pics!

Glad I could help.

 

[RMI22]

Just an update, bilsteins should be here Wednesday and Toyo MTs should be here Friday. Don't really have a game plan on when it will all go on yet.

 

[RMI22]

If we dont get alot of snow tomorrow, Bils are going on in the AM. I ran into a guy at one of my job sites and asked him about his truck, he has a 14 ram same color and everything as mine. He said he has bils at 2.1 and 35 12.50s with 1/4" spacers and no rubbing. Looked great in person. My guy is installing them for 130 and i have a buddy that works at a tire shop that will mount and balance for next to nothing, if not free.

If all goes as planned I will have pics for you guys by Monday, assuming I can get in for an alignment by then. Not putting my toyos on until I get it aligned.

 

[R.L.K.]

If we dont get alot of snow tomorrow, Bils are going on in the AM. I ran into a guy at one of my job sites and asked him about his truck, he has a 14 ram same color and everything as mine. He said he has bils at 2.1 and 35 12.50s with 1/4" spacers and no rubbing. Looked great in person. My guy is installing them for 130 and i have a buddy that works at a tire shop that will mount and balance for next to nothing, if not free.

If all goes as planned I will have pics for you guys by Monday, assuming I can get in for an alignment by then. Not putting my toyos on until I get it aligned.

I installed my bills @2.8 " myself had to wait 5 days on my alignment , honestly it drove fine with no alignment , no pulling either way and looked dead straight .
When I got the alignment the tech said it was only barely out , so take it for a test drive after the install you may be suprized

 

[Galion]

I installed my bills @2.8 " myself had to wait 5 days on my alignment , honestly it drove fine with no alignment , no pulling either way and looked dead straight .
When I got the alignment the tech said it was only barely out , so take it for a test drive after the install you may be suprized

It'll drive fine without an alignment, but it will cause uneven tire wear (mainly cupping). But it would take a few thousand km's for it, driving a couple days won't be enough to do any real damage to the tires.

 

[RMI22]

If I can get the tires on and then get alignment done same or next day then I'll put them on first. I just don't want to go more than just a couple days without it being done.