Front license plate mounting

[Tanner025]

How do you mount the front license plate bracket on a 2021 ram limited

 

[Arvid]

Insert two screws and righty tighty.

it should come with screws. You’ll see screw holes in the middle of the bracket. Line it up so those holes line up with the holes in the bumper. The bracket screw hold have like an anchor that expands in the hole.

 

[rpinata]

If it's like my 2021, there are just 4 holes (not tapped) drilled right through the bumper. I live in a state that doesn't require a front plate, so those holes kinda suck.

Auto parts store sell plate bolts with plastic nuts but you have to have small arms to get your hand up there behind the bumper.

 

[Fredro Starr]

...but you have to have small arms to get your hand up there behind the bumper.

Which is why I can't attach mine...

 

[Arvid]

The bracket will come with 4 good-sized screws and 2 small ones. The small ones are for the rear plate. The bracket gets snapped into the bumper, then two screws go in to expand the plugs and hold it in place. Then you put the plate in and the other two screws pass through and expand the other two plugs. Takes longer to type than to do.