got my foxbox finally...help with wiring!

[mxblaster83]

im trying to wire my 2 svc 4ohm subs into 2ohm but i can't drill a hole from 1 side to the other to wire the subs together,

how can i make them 2ohm by using both speaker terminal cups?? and just 1 speaker wire running to the amp.

 

[G_Altima]

Positive from one terminal to positive on the other terminal. Run the positive from the amp to one of the positive terminals. Repeat for the negative. http://www.diymobileaudio.com/forum/general-car-audio-discussion/127739-wiring-two-svc4-ohm-subs-2-ohm-mono-amp.html

 

[mxblaster83]

yeah that would have worked. i ended up drilling a hole where the ports are ran the wire right threw ,but it was hard to stuff the 2 pos and neg onto the sub.

i think i might take it apart and do it that way. thank you.

anyways, got it all together my subs were hard to fit in the holes i had to pound them down i lil bit, i don't know if i will be able to get them out now lol.

when i close my doors the subs hum really loud, any idea? it did'nt do that with my other subbox!

 

[Marc1982443]

Did you seal the pods to the box?

 

[mxblaster83]

yes i did, i used latex silicone, its been 15 hours so i hope they are dry enough to start pounding. haha