Helppp!!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jsmith180601

Member
Joined
Mar 13, 2013
Posts
43
Reaction score
2
Ram Year
2002
Engine
4.7
I disconnected my battery to clean the terminals. After I put the leads back on the battery I checked to make sure things were working as they should. Well without the key in the ignition neither the headlights or fog lights come on when the switch is turned. When the key is turned to on (and when started) the headlights,all the tail lamps(except back up lights), dash lights come on. High beams don't work floodlights don't work and wipers don't work. Turn signals also don't work.
Like I said all I did was unscrew the bolt to remove the battery terminals toclean them...


Please if anyone knows or can help I'd love that

Sent from my HTC One VX using Tapatalk 2
from my HTC One VX using Tapatalk 2
 

swamp_life hemi 05

Senior Member
Joined
Jul 14, 2011
Posts
2,641
Reaction score
70
Location
Tallahassee Fl.
Ram Year
2005 laramie
Engine
Hemi 5.7
Check all of the fuses. You could have popped a couple putting the terminals back on. Only thing I can think of......

Sent from my VS920 4G
 
OP
OP
J

jsmith180601

Member
Joined
Mar 13, 2013
Posts
43
Reaction score
2
Ram Year
2002
Engine
4.7
Nope my father in-law checked all the the fuses and relays.

Were leaning towards the computer

Sent from my HTC One VX using Tapatalk 2
 

Hurley91

Senior Member
Joined
Jul 8, 2012
Posts
151
Reaction score
5
Ram Year
2006
Engine
5.7L
Will it start? It sounds like it's just a fuse.
 

HolyRamBatman

Senior Member
Joined
Sep 2, 2012
Posts
2,435
Reaction score
411
Location
Deep in the Heart of Texas
Ram Year
96
Engine
5.9
Sounds like a fuse. BUT it could also be a connection somewhere. Sometimes a weak connection will stay together until it loses power and then it's broken.
Kinda like changing a bad light bulb. When you turn it the filament will make contact and work. Turn the switch off and it wont work.

Thinking about it check your grounds around you battery. There should be a bunch that come into one spot to make up. Good luck
 
OP
OP
J

jsmith180601

Member
Joined
Mar 13, 2013
Posts
43
Reaction score
2
Ram Year
2002
Engine
4.7
It was the fcm (front control module) that fried

Sent from my GT-P3113 using Tapatalk 2
 
Back
Top