Installing fog lights

[Bearcatrp]

Have a 2021 Ram 3500. Want to install fog lights. Dealer wants over $600. Screw that. What has to be removed to access the back of where the fog lights go? Plan to hook into the auxiliary panel. Did a quick peak but not a thorough look. Looks like that bottom plastic piece has to come off. Is that correct? Appreciate any help. Thanks.

 

[tron67j]

Did you reach out to Nick and 1stindoor to see how they could help?

https://www.ramforum.com/threads/fog-light-for-2021-3500.217016/

Plus a search for other similar threads?

SwitchPros 9100 & Front Bumper Lights Install - My Experience

Howdy! Not seen a ton of discussion on lights, switch modules, or anything like that. So I dove into this little project head-first and wanted to share the experience in case anyone is looking to do something similar. Not sponsored by anyone. I do a lot of hauling in remote areas between TX and...

www.ramforum.com

 

[Bearcatrp]

Forgot about my other post. Just sent a message to 1stindoor. Don’t want a bunch of lights across the front. Just where the oem lights go. Thanks for the reply.

 

[1stindoor]

Hmmm...did not get the message. Anyhow I went the "easy" route and bought a complete kit. Attached the fogs in my after market bumper, ran the wiring through the firewall at the steering column and attached the on/off button below the steering wheel on the plastic trim. I'll try and look up my lights on Amazon and get the link.

 

[1stindoor]

Auxbeam LED light pods with 6 lighting modes for optimal visibility in any driving or off-road situation. Check it out now!
https://a.co/d/8Qs4fls

 

[Bearcatrp]

Those look cool as hell. Will have to look into this.

 

[Bearcatrp]

Hmmm...did not get the message. Anyhow I went the "easy" route and bought a complete kit. Attached the fogs in my after market bumper, ran the wiring through the firewall at the steering column and attached the on/off button below the steering wheel on the plastic trim. I'll try and look up my lights on Amazon and get the link.

Sorry, actually pm’d nick.

 

[sage6058]

CJC Offroad has the best aftermarket setup. They use Baja Designs foglights. Very easy to install in the factory spots. I put them on my 2020 and wired them to the Aux switches.

 

[Bearcatrp]

Auxbeam LED light pods with 6 lighting modes for optimal visibility in any driving or off-road situation. Check it out now!
https://a.co/d/8Qs4fls

How hard to install these? Last time I installed fog lights was in the 80’s.

 

[1stindoor]

Easy on mine because it was an aftermarket bumper. Bolted right in. Aiming them for ground and fog use was harder.