Largest tire on stock wheel scenario

[motley1987]

I have a 2014 1500 4WD with 20 inch stock wheels. I'm thinking about lifting the front to level it out and put 1/4 inch spacers on the wheels. If I do that, what's the largest tire I can fit without too much rubbing? Can I fit 35s? Thanks for the help!

Ben

 

[N1ck]

W/ spacer and level, 35x12.50x20. It's been 1847281047261728 times

 

[motley1987]

Thanks for the info! I knew it's been asked a lot but I'm on my phone and the search isn't too easy that way. Thanks again!

 

[CMil527]

pics or it didnt happen!

 

[motley1987]

Does anyone know if they make Duratracs in 35s for 20 inch wheels? Also is there another 35 inch size to like 315 60 20 for example? Some sites I cant search by 35 12.5 20. Thanks again!

 

[AustinB]

This should answer many of your questions, if you actually take the time to read it and learn.. Then when you come back to ask good questions.. It will make more sense when you get the answers.


Guide to Leveling & Wheel and Tire Sizing for 06+ 4wd Ram 1500's
http://www.ramforum.com/showthread.php?t=70918

Its hard to answer your questions when you don't understand the information you're receiving.

IMO

 

[sbarron]

285/70 R20 would be roughly the same height, slightly skinnier

 

[AustinB]

I think you may mean 285/65r20?


IMO

 

[jgruberman]

Go to the Bilstein pics thread in the Lift section... It has a lot of time sizes and pics to back the sizes up. Sorry I dont have the link handy, on my cell. I'm sure AustinB can get it pretty readily

Sent from my LG-H810 using Tapatalk

 

[AustinB]

Alright guys.. BILSTEINS post your pics!!!
http://www.ramforum.com/showthread.php?t=79370


IMO

 

[wsutard1]

Just an FYI, try to go with a production size tire. Doesn't have to be a ram production size just any production size. Your prices will typically be a lot cheaper due to the supply and demand for the tires.

My 275/65/20 were about $300 cheaper than the next smaller tire since they are a production F250 size. (Supposedly)

 

[AustinB]

If that is true.. I would still find it hard to believe even if I read it right off an f250 on the lot. The hd F series trucks look like they have tiny car wheels [emoji38]



Needs 37s on stock height to even look proportional.


IMO

 

[wsutard1]

If that is true.. I would still find it hard to believe even if I read it right off an f250 on the lot. The hd F series trucks look like they have tiny car wheels [emoji38]



Needs 37s on stock height to even look proportional.


IMO

They are fugly trucks aren't they. (Just my opinion guys)
http://www.sizemytires.com/make/ford/f-250#all

 

[AustinB]

Man you need to stop. One of my friends used to drive a F250. It really offends me that you called them ugly. This thread isn't about what you think looks good or bad. Either post up tire sizes or ****. All you do is ruin threads with your trolling.

Do not give your opinion unless it's what we want to hear!




IMO

 

[wsutard1]

Man you need to stop. One of my friends used to drive a F250. It really offends me that you called them ugly. This thread isn't about what you think looks good or bad. Either post up tire sizes or ****. All you do is ruin threads with your trolling.

Do not give your opinion unless it's what we want to hear!




IMO

Go with 275/65/20! its 34 not 35 but you will never no the difference.

Ok, now that's out of the way. WHITE TRUCKS ARE FUGLY (Just my opinion guys)

 

[wsutard1]

Also, if you go with a production tire size replacements will be easier to come by. Imagine you are driving through the middle of no where and a tires goes. The local tire shop us only going to carry popular, production sizes.

Either get a production size tire or don't drive in the middle of no where.