Led lights help please

[Splashgordan81]

Hello, I have a 2011 Dodge Ram 5.7 Hemi Laramie. I switched out the brake lights and reverse lights with updates led lights. The truck does not recognize the lights, it keeps telling me that the rear turn signals is out but they work. They also blink fast like they are out, how can I get my truck to recognize the led lights?

 

[1500ram12]

If they aren't canbus compatible led's then you'll need to add resistors like these 4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Resistors get very hot during working) https://www.amazon.com/dp/B00L4V9ECY/ref=cm_sw_r_cp_api_i_TgZiEbNSCKJFZ


2018 Ram 2500 6.4L Hemi Tradesman

 

[kurek]

Sounds like a downgrade rather than an upgrade. Lots of people seem to get those two mixed up

 

[JoeCo]

Sounds like a downgrade rather than an upgrade. Lots of people seem to get those two mixed up

Done correctly, it's a great upgrade. Did the same thing on my 11 when I had it, was one of my favorite cheaper upgrades.

 

[indept]

Be careful how you mount the resistors, they can get very hot

 

[Bigskyroadglide]

The circuit on the back ups does not need a resistor.

The tails do need one, to stop the hyper flash.