Let's see your tonneau covers, pickup covers, camper shells, etc.

[CBTBOB]

 

[Blackdodge2010]

I bought a Mopar canvas cover, but had an air gap in the front section. Was told it was "normal" by the dealer.
Anyone else have this issue?
I took it off an will be getting something more watertight to replace it.

I wouldn't think that it is installed correctly. The point in the cover is to completely cover the bed. Protecting whats inside. If yours was short at the front, creating a gap, then I would say that the mounted rails for the cover are to far to the rear of the truck. Easy adjustment should fix it up.

 

[Rainmn]

Undercover Ultra Flex. Originally bought an Extang Solid Fold 2.0 because I got a deal on it, but wasn't completely happy with it and returned it. I really like the Undercover so far, but haven't tested for leaks yet.

 

[RAMbunktious98]

Work in progress

 

[turnerje]

Had a peragon on my 13 Laramie and now a retrax mx on my Power wagon.


Sent from my iPhone using Tapatalk

 

[RAMbunktious98]

Had a peragon on my 13 Laramie and now a retrax mx on my Power wagon.


Sent from my iPhone using Tapatalk

I was thinking about a retract. But I decided on a backflip hard cover instead. Only thing wrong with it is that it is heavy on that first latch. I'm going to remove it an add a strip of steel along the bedcaps to reinforce then bolt the sides. I don't like the fasteners. Someone actually tried to steal it when I was loaded and the cover was open

 

[muddy12]

Angry elephant soft roll up cover.





Sent from my iPhone using Tapatalk

 

[wtabke]

My old RAM had a roll-up tonneau cover that collected water/ice and eventually rotted away.

It was replaced with a heavy fiberglass cover with an upwards facing lock that would continually freeze during the winter and was a pain to remove when I had to haul something.

When ordering my new truck, I knew that I wanted something like a tri-fold and that I could not afford/justify one of the heavy duty aluminum jobs that you can park a couple of wheelers on.

So I just opted for the factory cover.

It works nicely but I wish that I would have purchased a better hard tri-fold.

It bugs me the way that it flaps in the wind when driving down the road and I'm sure it will collect ice during the winter.

An upgrade may be in my future.

Sent from my SM-G955U using Tapatalk

 

[turnerje]

I was thinking about a retract. But I decided on a backflip hard cover instead. Only thing wrong with it is that it is heavy on that first latch. I'm going to remove it an add a strip of steel along the bedcaps to reinforce then bolt the sides. I don't like the fasteners. Someone actually tried to steal it when I was loaded and the cover was open

I looked as the BakFlip, but I decided against it because of having to stay against the back of the cab if I needed to move be something big. I sacrificed on the space the canister takes up, but so far I haven’t needed it. Especially since the Rambox comes with a bed extender.


Sent from my iPhone using Tapatalk

 

[HDHNTER]

Truxedo Pro X15 roll-up

 

[JimGregory]

Lowmax. I may through bolt it for security. Anyone do that with any covers? These clamps kind of pinch instead of clamping square.

 

[Nick@GotExhaust]

Lomax us by far the most popular here with the bakflip and extang behind it. If I buy another bed cover it will be the Lomax.

We offer many bed cover brands. If anyone would like a quote just send me a message.

Sent from my SM-G965U using Tapatalk

 

[Udy2554]

I ordered an ARE CH series! Screened windoors, flip open front slider, LED lighting, and reinforced roof with 500lb Yakima rack!

I need the lockable storage for tools, recovery equipment, and any hunting equipment and firearms!

A little “sleep it off” space is always nice to have too!

I should take delivery in a week or so!

 

[Noeyes]

Sorry about the wetness but the remnants of Florence haven’t quite left the area yet. Maybe I’ll get to wash this baby next week.

View attachment 140754

View attachment 140755

What kind of cover is that? Looks good!

Sent from my SM-N960U using Tapatalk

 

[tidefan1967]

What kind of cover is that? Looks good!

Sent from my SM-N960U using Tapatalk

Undercover classic

 

[RAMbunktious98]

I looked as the BakFlip, but I decided against it because of having to stay against the back of the cab if I needed to move be something big. I sacrificed on the space the canister takes up, but so far I haven’t needed it. Especially since the Rambox comes with a bed extender.


Sent from my iPhone using Tapatalk

Yes that's true. But what I did as far as securing loads when tailgate is down I added retractable ratchet straps to the rear of the bed. It works very well

 

[sumgruuvz]

I'm waiting for some ******** down here in Texas to get a personalize plate that says "California"----driving in the left lane 10 under the speed limit---LOL
Jay


Sorry for the hijack---

Worse yet. Some ****** hillbilly that says something to do with the University of Texas in Norman. The sooners are a disease. Nasty one to boot.

 

[Sportznut]

Undercover UltraFlex. As expected it is not 100% waterproof but does allow the tailgate to come down without fiddling with keys and locks.

My previous Undercover Classic was 100% waterproof but the locks would freeze in very cold temperatures and needed regular lubrication. It also required to unlock the cover and raise it before you lowered the tailgate.

Sent from my SM-N920V using Tapatalk

 

[Pull Ya]

^^^^ Nice looking truck!!!!
Jay

 

[2001ws6]

GatorTrax MX