Leveling kit and upper control arms

[Samb992]

So i have a motofab 2.5 leveling kit I was going to put on my truck it's an 18 but I have read about needing to get upper control arms first is that true or can I chance it with the leveling kit heats the possibility of my stock ball joint coming out

 

[DANIEL AYALA]

Shouldn't need UCA for leveling. But if you care about angles... maybe invest on it while you undo it to get your suspension out.

Sent from my SM-G975U1 using Tapatalk

 

[Ohio5pt7]

I have the moto fab 3" I put RC ucas on why take the chance mine is also a 18

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Pull Ya]

"An ounce of prevention is worth a pound of cure" Do the UCA's
Jay

 

[Samb992]

Okay I will buy the UCA's thanks guys

 

[Samb992]

What are the part numbers for the mevotech does anyone know I see one and then the other is lile the xfactor or something lol

 

[Donnie Straps]

I have a Carli kit, has been on for 27,000 miles and my front end is fine.

 

[Burstingbb]

Do you recommend them for Bilstein 5100's? The stock ones are pretty much in a neutral position with almost zero angle

 

[Samb992]

Alright guys need some help so on rock auto they have 2 different kinds of mevotech ucas which ones do I get economy or daily driver or does it matter

Sent from my SM-N960U using Tapatalk

 

[Moparfanatic21]

Alright guys need some help so on rock auto they have 2 different kinds of mevotech ucas which ones do I get economy or daily driver or does it matter

Sent from my SM-N960U using Tapatalk

Doesn't matter both are the same part#

 

[FF1899]

I just picked up the heavy duty arms. For an extra 30 a side why not

 

[Samb992]

Where at and how much

Sent from my SM-N960U using Tapatalk

 

[FF1899]

Rock auto I think the were like 96 each. Still cheaper then the basics just running to a local part store. Hell if you are leveled or have any lift up front and want the ready lift tubular arms I will sell them to you when I swap them out. They are still good just need flat now with the new knuckles not angle correction arms