Lifted with stock wheels.... post em here!!!

[Chadman]

Hi. New member here. The above pics are of my 2012 Longhorn. First pic is stock with a 3" rake.

Next pics are of it with Bilsteins set at 2.8" and a RC 1.25" body lift.

Installed 275/65-20 Duratracts.

 

[Chief_6.7]

View attachment 131061 View attachment 131058 View attachment 131059


View attachment 131060

Looks way better leveled...... that nose dive is just to much

 

[Gary2]

Can't leave anything alone . I switched the Bilstein's to 2.1 from 1.4 in the previous pics. It has about 7/8" rake even though it don't look quite like it parked there. View attachment 131576

 

[Medpilot]

35/11.5r20 Durra Grapplers on stock 20x9's. 4" BDS lift and 1" Bora spacers.

 

[Medpilot]

Honestly I was expecting a bigger difference with a 35" tire. My 295/65r20 Trail Grapplers I had on last summer were a lot taller.

 

[JB1]

Ya 35’s sound good but they really only measure about 34.5, then when bolted on the truck you lose about 1” putting it around 33-1/2 to 33-3/4.

Your truck does look really nice

 

[Medpilot]

Ya 35’s sound good but they really only measure about 34.5, then when bolted on the truck you lose about 1” putting it around 33-1/2 to 33-3/4.

Your truck does look really nice

Thanks! True, the 35's only measure 34.5" and the 295/60 measure 35.4". And like you said, the tire is loaded down. Overall I"m pretty happy with them.

 

[17CrewCab1500]

35/11.5r20 Durra Grapplers on stock 20x9's. 4" BDS lift and 1" Bora spacers.

View attachment 132114

View attachment 132115

Truck looks really good! I am in Chandler on the Gilbert border. I will have to keep an eye open for you! Great looking truck!

 

[02ramboi]

Honestly I was expecting a bigger difference with a 35" tire. My 295/65r20 Trail Grapplers I had on last summer were a lot taller.

View attachment 132116

View attachment 132118

Sweet looking tires I said the same thing when I put my 35’s on


Sent from my iPhone using Tapatalk

 

[Bruce4060]

2"/1" Lift, 1/4 front spacers, 305/55/20 Grabber X3 tires.

 

[Slim]

Rough Country 6" Lift
BfGoodrich T/A KO2 LT285/65R20 (35")
No spacers. 2014 1500, Superchips tuner. A tad dirty in a couple pics, but it is a truck.

View attachment 130933

View attachment 130934

View attachment 130956

View attachment 130957

View attachment 130958

Looks good! Quick question. Is the tuner worth the money?


Sent from my iPhone using Tapatalk

 

[Gary2]

Most tires of the same size have always measured different BUT its no secret and each tire has their exact size publicized so you should know before you give them your money . Their are probably more 37s closer to a 35 than 35s

 

[IBenton Christley]

View attachment 120642

I have the same exact ram. Mine is still stuck height. Is yours leveled or lifted. I'm thinking about doing the bilstein ride height adjustables

 

[Michael Hinchley]

Looks good! Quick question. Is the tuner worth the money?


Sent from my iPhone using Tapatalk

Absolutely. I literally have to pedal the truck. Should have went with 37's.

 

[rwhjr]

Just got some flares put on to keep the rocks these tires are picking up from slinging down the side of the truck quite as much. Didnt go bushwackers bc I wanted something a little smaller but still needed more than OEM so I think I’m happy with these so far as long as they hold up.

I feel like the only thing I’m initially not pleased with is the rubber edge liner....I feel like it’s something I will periodically have to replace but maybe I’m wrong.

 

[Algunz]

Zone 6/5, bils, no spacers, Mickey Thompson AT 35's

 

[rwhjr]

Here’s a couple more in better light...

 

[Chief_6.7]

View attachment 133924 View attachment 133925 View attachment 133926 Here’s a couple more in better light...

Nice looking truck..... what are the specs of your lift?

 

[rwhjr]

Nice looking truck..... what are the specs of your lift?

Pro Comp 6”
Bilstein 5100s (but they’re just at the .7” setting)
Then the ridge grapplers in a 35x11.5

The only thing I’m thinking of changing now is going from my 1.5” spacers to 2” to make them a bit more flush with the new flares but not 100% decided yet.

Your truck looks great too. It gave me confidence in the 6” lift with OEM wheels and spacers bc of how good it looks!

 

[Chief_6.7]

Pro Comp 6”
Bilstein 5100s (but they’re just at the .7” setting)
Then the ridge grapplers in a 35x11.5

The only thing I’m thinking of changing now is going from my 1.5” spacers to 2” to make them a bit more flush with the new flares but not 100% decided yet.

Your truck looks great too. It gave me confidence in the 6” lift with OEM wheels and spacers bc of how good it looks!

Thanks brotha, For some reason your lift makes those tires look small Hahahaha but not in a bad way cause it looks great, but it could be the pro comp lift it self as I have it and it makes my 35s look small. I kinda regret not getting 37s but oh well yours and mine still look good.