Lighting issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Russmccardle

Junior Member
Joined
Apr 30, 2015
Posts
8
Reaction score
1
Ram Year
2004
Engine
Cummins 5.9
My 04 2500 diesel is having a problem. Left turn and brake light out. High beams only work on left side and lows on right only. No turn signals in front. All running light work and light work at the 4 pin trailer connector but not the seven. Any ideas?
 

Kevnic

Junior Member
Joined
Apr 14, 2015
Posts
14
Reaction score
0
Ram Year
2004
Engine
5.7
My 04 2500 diesel is having a problem. Left turn and brake light out. High beams only work on left side and lows on right only. No turn signals in front. All running light work and light work at the 4 pin trailer connector but not the seven. Any ideas?

It is more than likely a problem with the front control module
 
OP
OP
R

Russmccardle

Junior Member
Joined
Apr 30, 2015
Posts
8
Reaction score
1
Ram Year
2004
Engine
Cummins 5.9
I just pulled the fuse box out. Noticed a little green corrosion near a weep hole. The lighting control module was my next idea
 
OP
OP
R

Russmccardle

Junior Member
Joined
Apr 30, 2015
Posts
8
Reaction score
1
Ram Year
2004
Engine
Cummins 5.9
Well I swapped the front control module from my 03 into my 04 hoping the lights would work. Still having the same issue. Wanted to use the fuse box in my little experiment also but a couple connections were different. Starting to think it's the fuse box itself
 

Kevnic

Junior Member
Joined
Apr 14, 2015
Posts
14
Reaction score
0
Ram Year
2004
Engine
5.7
You can take apart your fusebox and clean it. If the corrosion is bad enough, you may have to solder a jumper wire into complete the circuit.
 

Forum statistics

Threads
210,828
Posts
3,058,563
Members
170,670
Latest member
joshhhh
Back
Top