long shot

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

drtumolo

Member
Joined
Dec 6, 2017
Posts
55
Reaction score
8
Ram Year
2014
Engine
5.7
This will be a long shot but does anyone tow with the set up I am about to use? I have a 2020 Ram 2500 4x4 crew cab big horn gasser that I will be towing a new to me 2018 Jayco Eagle 322RLOK. I want to use a Hensly hitch but trying to decide on what drop I need. Both truck and camper are not with me so I cant measure them but heading to look at a used Hensly this afternoon. Can anyone help me out with either hitch and camper coupling measurements or if your using this set up what drop hitch are you using? Thanks
 

Tulecreeper

Senior Member
Military
Joined
May 27, 2023
Posts
1,831
Reaction score
2,079
Location
Sthrn AZ
Ram Year
2023
Engine
6.4 Hemi
This will be a long shot but does anyone tow with the set up I am about to use? I have a 2020 Ram 2500 4x4 crew cab big horn gasser that I will be towing a new to me 2018 Jayco Eagle 322RLOK. I want to use a Hensly hitch but trying to decide on what drop I need. Both truck and camper are not with me so I cant measure them but heading to look at a used Hensly this afternoon. Can anyone help me out with either hitch and camper coupling measurements or if your using this set up what drop hitch are you using? Thanks
Get one of these and you won't need to measure beforehand.

1715528834393.jpeg
 

JayLeonard

Senior Member
Military
Joined
Oct 5, 2019
Posts
752
Reaction score
843
Location
Florida
Ram Year
2021
Engine
6.7 L Cummins
I have a 2021 2500 bighorn CC ( with the Cummins) and the top of my ball is 26 1/2 inches from the ground. Im pulling a 30 ft Grand Design TT with an equalizer E4 hitch.
 
OP
OP
D

drtumolo

Member
Joined
Dec 6, 2017
Posts
55
Reaction score
8
Ram Year
2014
Engine
5.7
I am looking at a Hensey hitch and the receiver bar is non adjustable.
 

2003F350

Senior Member
Joined
Feb 23, 2013
Posts
1,323
Reaction score
1,246
Location
Michigan
Ram Year
2022
Engine
6.7 CTD
With that setup I wouldn't buy a Hensly. Not worth the added expense. The trailer just isn't heavy enough behind that truck to warrant it.

No issues running 65mph on my old Power Wagon, and 65+ (I don't usually go over 65 unless I NEED to) with the current truck in my sig, with a setup similar to the below:

WDH + stand-alone sway control

Takes about 5 minutes to hitch up if you aren't in a hurry, I can be off a little unlike some of those high-dollar hitches where you have to be dead-on, and allows me to adjust how much sway control I actually need on the fly.
 

joesstripclub

Senior Member
Joined
Dec 13, 2019
Posts
455
Reaction score
556
Location
Lees Summit, MO
Ram Year
2021 2500 PW
Engine
Hemi 6.4
I have the 4" drop Anderson and it is plenty for my PW and a toy hauler with a similar tongue weight. It is adjustable to a few positions.
 

Forum statistics

Threads
196,595
Posts
2,884,070
Members
158,026
Latest member
mjw930
Top