No power to new head unit

[boss_hogg24]

So i got a new pioneer in-dash DVD receiver and when i hook everything up, there is no power to it. I made sure everything was hooked up correctly and checked all the fuses and everything was good and it still didn't work. I know the head unit is good cause i touched the wires to the battery to test it and it turned on right away. I'm stumped on what to do to try and fix it. Any help would be greatly appreciated.

 

[sullivan]

Are you using a module of any sort?

Something like this Amazon.com: PAC C2R-CHY4 Radio Replacement Interface for Chrysler: Car Electronics

Your obviously not supplying 12v to the headunit, remember it needs to be switched, turn the ignition on and test the wires using a multi meter

 

[quietpeen]

Maybe the adapter that Sullivan posted a link to us the same thing, but are you using a can-bus adapter?