WhiteExpress
Senior Member
- Joined
- Sep 8, 2011
- Posts
- 18,185
- Reaction score
- 3,275
- Location
- Midland, TX
- Ram Year
- 2004
- Engine
- 5.7 Hemi
Who's done it? I ordered a set of Sport headlights for my old man's Ram.
I know I could simply splice headlight harnesses, but what I'd like to do is prepare it to run 80/100W bulbs in both locations.
Then wire it so that when you turn on the highs, the high beam filament in both bulbs comes on / stays on.
I know I'm going to need 2 relays and a diode. Any clue where to get a diode / how to spec one out? I've never messed with one before.
I know I could simply splice headlight harnesses, but what I'd like to do is prepare it to run 80/100W bulbs in both locations.
Then wire it so that when you turn on the highs, the high beam filament in both bulbs comes on / stays on.
I know I'm going to need 2 relays and a diode. Any clue where to get a diode / how to spec one out? I've never messed with one before.