NP231D to NP241DLD swap

[Jimmy68]

Well, T-case is out of my 01 1500. Have an old t-case out of a 94 2500. Driveshaft fits. Input splines the same. Length the same. Damn input on the 241 is 1 1/2" long and the 231 is 3/4". Having a smoke and a coffee. Splines are long enough, I'm going to cut the shaft down.

 

[dapepper9]

How'd it go?

 

[Jimmy68]

How'd it go?

Very well. This T-case is good. The oil out of my old 231 was almost black and had a real nice silver swirl in it. Lol.

 

[Jimmy68]

Fihured out may vacuum leak. Zip tied the line to the t-case as I have the CAD locked already. Heater doesn't shuffle around anymore. Going to get new vac lines and replace the switch and CAD. Get it all working again as it should. But for now I have 4x4.