Nogoal9932
Junior Member
- Joined
- Feb 23, 2015
- Posts
- 9
- Reaction score
- 0
- Ram Year
- 2005
- Engine
- 4.7
Hey guys. So I bought an 05 1500 4wd 4.7 last month. I hve put 1000 miles on it, its at 100k now. Anyway my check engine light came on today and threw the p0344 code. So, I replaced my cam shaft position sensor, but no luck...light and code still on.
the truck has run the same since I've gotten it. Idles fine, starts fine, but once I'm over 40 acceleration is sluggish. Meaning that I give it more gas and no response, so I ease more and more then it kicks through like I floored it quick. I'm not even sure if the two are related, but any help would be appreciated.
the truck has run the same since I've gotten it. Idles fine, starts fine, but once I'm over 40 acceleration is sluggish. Meaning that I give it more gas and no response, so I ease more and more then it kicks through like I floored it quick. I'm not even sure if the two are related, but any help would be appreciated.
