Power lock actuators?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bembry

Junior Member
Military
Joined
Oct 4, 2022
Posts
7
Reaction score
14
Location
western NC
Ram Year
1986
Engine
318
Are OE style replacement power lock actuators available for 1st gens?
 

GTyankee

Senior Member
Supporting Member
Military
Joined
Nov 2, 2020
Posts
10,065
Reaction score
12,611
Location
El Cajon Calif. 92021
Ram Year
2016
Engine
3.0 ecodiesel
Hopefully the OEM Actuators are available, but they may be hard to find.

Is there a way to open them up & rotating some parts to make it work
 

d100experience

Junior Member
Joined
Oct 24, 2022
Posts
4
Reaction score
1
Location
Center of USA
Ram Year
1988
Engine
318 LA roller
I wonder what the interchange between models is like. I installed factory lock solenoids in an early '70s Dodge car using ones from a much later Chrysler and the fit was perfect.
 

KEGGles

Junior Member
Joined
Oct 12, 2022
Posts
1
Reaction score
1
Location
FL
Ram Year
1985
Engine
5.9l Magnum
@bembry Not sure if you are looking for the latch portion or the actual lock assembly. I put this on driver side 55075873 and this should be passenger 55075872. If not this was the kit I was going to throw https://www.lmctruck.com/1972-93-dodge/door-parts/electric-door-locks in mine as someone looks like they were blind and doing electrical work on my doors. Only issue with the actuators listed above is the thread changes. M6x1x18
 
Last edited:
OP
OP
bembry

bembry

Junior Member
Military
Joined
Oct 4, 2022
Posts
7
Reaction score
14
Location
western NC
Ram Year
1986
Engine
318
@bembry Not sure if you are looking for the latch portion or the actual lock assembly. I put this on driver side 55075873 and this should be passenger 55075872. If not this was the kit I was going to throw https://www.lmctruck.com/1972-93-dodge/door-parts/electric-door-locks in mine as someone looks like they were blind and doing electrical work on my doors. Only issue with the actuators listed above is the thread changes. M6x1x18
I don't need the latches, just the actuators/solenoids. That kit may be the way to go!
 
Top