RCX Body lift installed

[0212353]

What wheels/tires are you running?
Do you know the specs of the wheels? Size/offset?
Thanks

Wheels - 20" XD Hoss. I bought these used, but I believe they are -12MM offset. I can't remmeber.....
Tires - 296/60/20 Nitto Trail Grapplers

 

[pd298]

Did you relocate the exhaust or is there a larger gap?

 

[0212353]

I moved the tips earlier this week - here's what it looks like now

 

[[email protected]]

Looks great! When yall talk about drilling holes. Where and why?

 

[Musclemckeester]

Looks great! When yall talk about drilling holes. Where and why?

You have to drill holes for the new bumper mounts.

 

[0212353]

bingo

 

[Gardenfan]

One of the nicest rams I have seen so far. Which flares are those?

 

[0212353]

OEM laramie flares

and thanks!

 

[Gardenfan]

Oh right on, I should have no problem getting the girls in the shop to get those for me.

 

[0212353]

about 2 years ago you could get them color matched from the part department.........now, nope. I actually nabbed mine from eBay for a steal, had my painter paint 'em up and I had less in them than the new ones from Mopar go. Can't beat that!

 

[DisturbedGator]

if you dont mind me askin how did you re-adjust the exhaust? I just ordered mine and plan on putting it on next friday

 

[0212353]

the tips are held on with a clamp. Loosen the clamp, push the tips up. took about 5 minutes.

 

[Black express]

Truck looks good, I've been following the thread for awhile. The rcx combo kit with level and body lift keeps calling me.

 

[DisturbedGator]

the tips are held on with a clamp. Loosen the clamp, push the tips up. took about 5 minutes.

thanks, sounds easy enough. for the holes that you had to drill for the new bumper bracket did you use a smaller drill bit for a pilot hole, or better yet what drill bit was best to drill into that metal?

 

[0212353]

Truck looks good, I've been following the thread for awhile. The rcx combo kit with level and body lift keeps calling me.

do it! relatively cheap mod, and gives a nice stance

thanks, sounds easy enough. for the holes that you had to drill for the new bumper bracket did you use a smaller drill bit for a pilot hole, or better yet what drill bit was best to drill into that metal?

Used a smaller one first - so the bit doesn't jump around on ya.

I have no clue what we used - we had a box of bits, just grabbed one.

 

[Ryan12]

Hey JJ did you do the 1inch, 2inch or 3?

 

[0212353]

Thats the 1.25" there

 

[OutlawTrucker]

How hard to do this? What's needed to do the 2" kit?

 

[0212353]

with the right tools, its not bad.

There isn't a 2" kit, just a 1.25 and there is a 3" out there too.

 

[OutlawTrucker]

What all does the 3" kit include?

Gotta extend any wired/hoses? I'm seriously thinking of doing this. How long it take to install? Cost of kit?