Anthony Stringer
Junior Member
I broke my tail light cover. Can you replace the cover, or do you have to replace the whole light?? I can’t seem to find covers, just the whole light
Replacing tail light cover
- Thread starter Anthony Stringer
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It's an assembly, you replace the whole thing.
Open gate, two T25 torx screws hold it in. Pull straight back to remove. DO NOT twist or pull sideways, there's tabs on the side that click into the housing and you'll snap them off.
Amazon has a wide assortment, just be exact with fitment requirements.
Open gate, two T25 torx screws hold it in. Pull straight back to remove. DO NOT twist or pull sideways, there's tabs on the side that click into the housing and you'll snap them off.
Amazon has a wide assortment, just be exact with fitment requirements.
BOWERSFJ
Senior Member
- Joined
- Apr 29, 2014
- Posts
- 2,713
- Reaction score
- 3,237
- Location
- Uniontown OH
- Ram Year
- 2012
- Engine
- 5.7L Hemi
What year ? I have a set of 2012’s ...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
BOWERSFJ
Senior Member
- Joined
- Apr 29, 2014
- Posts
- 2,713
- Reaction score
- 3,237
- Location
- Uniontown OH
- Ram Year
- 2012
- Engine
- 5.7L Hemi
They are bulb, not led ...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
