Rolacing OEM horn with FIAMM El Grande

[LemmysDad]

Need a little help. I’ve searched around the interweb a little and come up empty handed. I want to replace my OEM horn with the FIAMM El Grande. Can anyone give the headline version of how to do so? I’m handy so I’m really looking for info on location and install.

 

[Bssc]

probably just need to trace back the wires to the relay swap or double check it to see if it is the same and plug in the wires should be dead simple ... this all by just looking at the photo

 

[crash68]

The factory location of the horns is above the driver side front wheel, you have to pull the liner down partially.
Given those horns are higher current than OEM, probably best to wire the existing horn wires to a relay then tap right off the battery with a fuse to feed the horn relay.