Core Attitude
Junior Member
- Joined
- Dec 9, 2013
- Posts
- 12
- Reaction score
- 0
- Ram Year
- 2005
- Engine
- Hemi
Hi all, I have a brand new S & B CAI that I installed last week. I love the system, think it was very well designed, and install was very straight forward. The only issue I am having is getting the lid to seal, especially on the long sides of the box. I have tried the pre-curved lid that was supplied with the kit, and also the flat lid that they shipped me when I contacted them about the issue.
Has anyone else had a problem with this? I have approximately 1/8" to 1/4" gap depending on which side of the box I measure on, and there is an audible whistle upon acceleration which seems to be caused by the sharp edges on the side of the lid.
Thanks in advance!
Has anyone else had a problem with this? I have approximately 1/8" to 1/4" gap depending on which side of the box I measure on, and there is an audible whistle upon acceleration which seems to be caused by the sharp edges on the side of the lid.
Thanks in advance!