SALE!!! DIY Projector Parts

[0212353]

I use SEM General Purpose Adhesive, part number 68432.

Its a 2 part epoxy, mix it up, dab a little on, it holds! The stuff is great, doesn't gas out like the some other epoxy I have used, and it holds like a mother. Its not cheap (about $10 a tube), but I just think its the best.

 

[GhostRam94]

Hmm gonna look into it, prob just pick up whatever a store has lol

 

[0212353]

just remember to let it gas out before sealing them in the headlight.

 

[GhostRam94]

Gas out?? And LEDs should be the last thing to go on right??

 

[0212353]

epoxy / glues / silicones will gas as they dry. Fumes are bad, mmmkay. So, mount the stuff, let it sit for a bit (overnight is great) then you can put the lens on.

I mount the LEDs before I put the shroud on the projector.

 

[GhostRam94]

Ok so assemble and check firmament, dissemble, paint then dry and put on LEDs then let cure overnight then reassemble??

 

[0212353]

rip lights open. paint. dry. mount leds, let sit til its solid. affix shroud to projector. mount projector. let it gas as per the instructions of whatever epoxy you get. assemble.

 

[GhostRam94]

Oh the projector gets epoxied in also??

I guess the shroud expoxys also to the projector or does it like lock in place??

 

[0212353]

no, you don't have to epoxy it in. I mount the shroud (with the supplied screws) as soon as the leds are dry. Then mount it, and let it air out.

 

[GhostRam94]

Oh I was like ummm?? Lol I got ya, lol this should be fun ugh it's gonna suck letting everything dry lol

 

[suzukiquadrider]

JJ pm me about what can be done to a chev 2500 hd.

 

[0212353]

sent!

 

[suzukiquadrider]

:********: replied

 

[GhostRam94]

^^^^ this should be interesting

 

[0212353]

Don't the overwhelming majority of your Ram customers go with the Gatling 2.0's?

It depends on the year of the truck. Nobody with a 4th gen quad has gone with the 2.0s yet........there's a little bit of cutting involved. LOL

 

[Catchin Zs]

It depends on the year of the truck. Nobody with a 4th gen quad has gone with the 2.0s yet........there's a little bit of cutting involved. LOL

 

[0212353]

yeah, just a little bit of trimming.....

 

[4x4Hemi]

That scares me hahaha

 

[0212353]

thats only if you opt to be adventurous and try to stuff the massive shrouds in the quad lights.

The mini gatlings fit with no modification needed.

 

[4x4Hemi]

go big or go home right?