Sharadon valve body

[wickedwhite2012]

Has anyone hear if there is or going to be a Sharadon valve body for the 645rfe?

 

[Hemi450hp]

Sharadon has already modified a few 2011-up VB's, but the issue is finding cores. We actually supply all the cores for Sharadon, but we have not been able to find any for the 11-up trucks. To top it off, Dodge wants almost $600 for a new VB.

Your best bet is to just send your VB to Sharadon to be modified and then shipped back. Only downside to this is the turnaround time without your vehicle.

 

[wickedwhite2012]

O the joys of a company truck. lol But would it be worth it?

 

[Hemi450hp]

Depends on what you are going for. You would gain more from a set of headers or a new tq converter than you will from the VB. To me, the VB is a last mod because while it does offer much firmer shifts, it is not the type of mod that is going to show a noticeable drop in 1/4 mile ET.

 

[greychevy]

I was thinking about doing one as well.

 

[wickedwhite2012]

I dont know what it is about this trans but it shifts different than any other truck ive ever had tuned. It my just be the shift tables

 

[wickedwhite2012]

Headers, gears and stall are next on the list. Hopefully it helps is out.

 

[Darkflow]

Moes offer's a VB and Torque Converter package, I would just save up a little extra more and buy that. Knock out 2 mods at once, that's what im going to do when I can finally save up for it. I still gotta get me a Diablo tuner w/Hemi Fever tune though.

 

[Hemi450hp]

The VB we have listed only works on trucks up to 2010 unfortunately. In 2011, Dodge changed the VB, and the cores for these newer trucks have been very difficult to find. There have been very few failures on the 11-up transmissions, so I expect it to be a few years before the cores are readily available.

 

[Hemi_Express2013]

I just ordered a VB from Mopar, $314+$100 core. After talking with SharaDon, we agreed that I could send them my replaced VB so they can at least have another on the table for '13. It's an expensive mod yes for what's gained but I can bring another VB to this table. Having Andre build my TC at Edge right now. Have it installed together with my Hearders, AFR gauge, hopefully with SharaDon. Call them, good people with years of knowledge.