Side bars / Nerf bars / Side steps...post pics here

[Musky Mike]

N-Fabs

View attachment 150370

What part # are the “cab” only? I can only find “wheel to wheel”

 

[troutspinner]

What part # are the “cab” only? I can only find “wheel to wheel”

D1980CC is what I put on my truck.

 

[Rambutz]

And here's the steps I removed: I think they were the Amps 4" iBoard, or at least they were extremely similar. Note, the body of the boards are aluminum, and at least 6 of the 12 bolts holding the boards to the mounting bracketry had corroded to the point that they were tearing out of the board itself. The truck was a lease from Maine; I live in upstate NY, and there were only 16,200 miles on it when I yanked these off. Besides the corrosion issues on the underside of both steps, these projected too far forward to allow the Weathertech flaps to be installed. The third pic is what the front driver-side bracket looked like. I don't know how long those boards had been on the truck, but evidently Maine is as liberal with their road salting as Upstate NY is, because the truck just isn't that old!

View attachment 150938

View attachment 150939

View attachment 150940

And here's the steps I removed: I think they were the Amps 4" iBoard, or at least they were extremely similar. Note, the body of the boards are aluminum, and at least 6 of the 12 bolts holding the boards to the mounting bracketry had corroded to the point that they were tearing out of the board itself. The truck was a lease from Maine; I live in upstate NY, and there were only 16,200 miles on it when I yanked these off. Besides the corrosion issues on the underside of both steps, these projected too far forward to allow the Weathertech flaps to be installed. The third pic is what the front driver-side bracket looked like. I don't know how long those boards had been on the truck, but evidently Maine is as liberal with their road salting as Upstate NY is, because the truck just isn't that old!

View attachment 150938

View attachment 150939

View attachment 150940

im from "Syracuse"

 

[TMD78]

Go Rhino RB20’s. Just installed them and like them a lot. Wow was installation easy! Having the threaded studs already in the truck makes this a super quick and easy install

 

[Ram75]

Mopar steps. I'm not a fan of them but it saves my doors from getting banged up by ignorant people who have no consideration for other people's vehicles.