PommyRam
Junior Member
- Joined
- Oct 31, 2023
- Posts
- 2
- Reaction score
- 0
- Location
- bozeman
- Ram Year
- 1997, 2016
- Engine
- hemi 5.9, cummins 6.7
Hello, I have a couple of electrical questions -
anyone seen a 6pin connection with this configuration? Its up front in my truck bed.
the trucks is a 2016 3500 Laramie. the chap i bought the truck from used it for his slide in camper so i presume it has something to do with that? the truck also has a 7pin trailer connection in the bed at the back (by the tail gate)
Im about to weld up a sled deck for it and want to have running lights, turn signals, winch and some bedlights for under the deck.
If i came off the 12v power pin on the 7pin trailer connection to a switch then onto the bed lights, am i right in thinking no power will b drawn with the switch off? I would be nice to do this for the winch too but I doubt it would have enough power to run the winch.
anyone seen a 6pin connection with this configuration? Its up front in my truck bed.
the trucks is a 2016 3500 Laramie. the chap i bought the truck from used it for his slide in camper so i presume it has something to do with that? the truck also has a 7pin trailer connection in the bed at the back (by the tail gate)
Im about to weld up a sled deck for it and want to have running lights, turn signals, winch and some bedlights for under the deck.
If i came off the 12v power pin on the 7pin trailer connection to a switch then onto the bed lights, am i right in thinking no power will b drawn with the switch off? I would be nice to do this for the winch too but I doubt it would have enough power to run the winch.
Last edited: