Sonnax on Stock Tranny?

[HemiBabe]

http://www.sonnax.com/system/announcement/44957-LB1_LB2.pdf

Would this even help my truck at all since I have a stock tranny? I just stumbled across it... ??

 

[KGBIGCOUNTRY]

Theres a few people running them. It increases line pressure like the old transistor mod did. Theres no real right or wrong anwser for this but its not a bad mod for round $40.

 

[HemiBabe]

Hrmmm....

 

[THEBAD1]

http://www.sonnax.com/system/announcement/44957-LB1_LB2.pdf

Would this even help my truck at all since I have a stock tranny? I just stumbled across it... ??

Yes it will help you stock trans! At WOT you won't get that bad slip and slid shift.

It's worth the $40 and only takes 2mins to put on!

 

[truckin151]

Just do a pcm reset on it before you take it for spin or it will do some funky things. I like mine and would definitely reccomend it now that its working right

 

[weedahoe]

It is certainly worth it IMO. I have one on mine and LOVE it.

 

[HemiBabe]

Alright, I'ma get it, thanks guys!

Btw, how do you do a PCM reset?

 

[BlackedOutHemi]

Pretty sure you disconnect the negative side of the battery, and turn the key to start for 30 seconds or so, and that should draw all of the power out of the components and reset it. Then just reconnect and go.


Sent from my iPhone using Tapatalk

 

[weedahoe]

2004 you can pull fuse #23 and flip the key on-off-on-off-on and wait for two chimes back to back. The key off and replace fuse

Pulling the battery cable works too but I like to keep my radio info

 

[HemiBabe]

Alrighty!! Thank yall

 

[truckin151]

Just pull the battery cables before you install it and by the time you are done reconnect them and have fun. Also look into some of that corrigated wire protector to keep it clear of damage (water/rocks/melting on the trans).

 

[hawk02]

It works nice.

 

[HemiBabe]

Just pull the battery cables before you install it and by the time you are done reconnect them and have fun. Also look into some of that corrigated wire protector to keep it clear of damage (water/rocks/melting on the trans).

Alright you got it! I have tons of that wire loom! Sweetness!