buckeyexx
Senior Member
- Joined
- Jan 25, 2015
- Posts
- 686
- Reaction score
- 711
- Location
- Ohio
- Ram Year
- 2016 Power Wagon
- Engine
- 6.4 Hemi
Just installed the Thuren front springs and shocks and need to get some clarification if possible. The instructions say to only tighten the top pin nut on the shock 3/4 turn from the moment you touch the top plate if you have the hard material bushing. 2 turns if you have the soft material bushing. Not really sure which I have on a power wagon. Instructions aren’t real clear on that part. Right now I believe I have the soft material and need to tighten two turns. I can still turn my shocks by hand but according to the instructions you shouldn’t over tighten them. Can someone answer if it would be possible turn the entire shock housing by hand once installed?