Tire pressure sensor replacement

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mark A Palmer

Junior Member
Joined
Feb 7, 2022
Posts
10
Reaction score
7
Location
Louisville, KY
Ram Year
2016
Engine
5.7 Hemi
I have a pressure sensor out on my 2016 RAM 1500. Can somebody advise me on what I need to do to replace this?
 

tron67j

Senior Member
Joined
Oct 14, 2019
Posts
4,093
Reaction score
5,409
Location
Maryland
Ram Year
2018
Engine
6.4 Hemi
Have you verified whether it is the sensor in the tire or the pickup sensor on the body? If not, switch the suspect tire with another and make sure the problem moves. If the tire sensor i have seen that sometimes the sensor can be removed without removing the tire. Not sure if that is an option but recommend doing it the right way and let a tire installer do it so that tire is rebalanced after.
 

NCRaineman

Senior Member
Joined
May 26, 2018
Posts
1,134
Reaction score
1,771
Location
NC
Ram Year
2019 1500 Classic
Engine
Hemi 5.7
Take it to a tire shop and have all 4 sensors replaced. They only last so many years. Just another government-mandated gimmick to cost you $$$.
 

Bigskyroadglide

Moderator
Staff member
Member Relations Specialist
Moderator Supporting Member
Joined
Nov 9, 2016
Posts
2,742
Reaction score
5,841
Location
Montana, officially RETIRED
Ram Year
2014
Engine
Hemi 5.7, supercharged
2016 is about 8 years old if they are original. Good life span. You can remove they without removing the tire, but requires a bit of skill and a way to breakdown the tire. If you have neither, then the suggestion of a tire shop is on point.
 

kellgp

Member
Joined
Apr 11, 2020
Posts
87
Reaction score
28
Location
Indianola IA
Ram Year
2020
Engine
5.7
I've changed them out in my garage. Requires some sweat and a few beers, but not too bad. I assume a shop would just charge you a flat rate to dismount/remount the tire.
 
Back
Top