Tire size for the SRT-10 rims

[DippedRam]

I just got my 22" srt-10 wheels ordered. Anyone who has these what tire size did you go with? I know I want to get the Nittos 420's but not sure if the 305/45/22 will give me any rub. Also were you able to use the factory tpms?

 

[TheSatinPumpkin]

From memory i think the factory tires were 305/40/22

 

[quietpeen]

is your truck 4 wheel drive or 2?

 

[Darkflow]

Im running 305/40/22's but my tires are some WinRun brand. I never heard of it but the shop I got them from gave me those. So when the time comes, ill be switching to Nitto's.

 

[S2kiHemi]

Go with the 305/45/22s. It will give you a little beefier sidewall. I had the SRT 22" wheels on my old 05 with the 305/45/22s and didn't have any rubbing issues.

 

[10ramsport]

305/45's Rub only at full lock.

 

[DippedRam]

Thanks guys for all the input. My truck is 2wd btw and I was only concerned about the front end because of the rake. I'm considering either a 2" leveling kit and go with the 305/45 or just do the 2/4 drop and go with the 305/40 just removed the running boards and painted the tailpipes tips black. Looks really good!!!

 

[10ramsport]

Thanks guys for all the input. My truck is 2wd btw and I was only concerned about the front end because of the rake. I'm considering either a 2" leveling kit and go with the 305/45 or just do the 2/4 drop and go with the 305/40 just removed the running boards and painted the tailpipes tips black. Looks really good!!!

I had a 2/4 and the 305/45s tucked nicely in the wheel wells. I think a 305/40 might be a little to skinny and will make your ride that much more rough. Just my .02

 

[partsguy]

i have the 305-40-22 nitto 420s and i like them but im thinking of running a 285-45-22 next time. i have a slight rub issue turning into parking spots and around 80 when i hit a large enough bump on the interstate. i have the mcgauhys spindles and a +30 offset. yours are gonna be fine with no drop and with a drop i would use springs instead of spindles as they tend to push the wheel outside a bit