13foxtrot
Junior Member
Will a Tranny from a 96 5.9 1500 bolt into a 2001 5.9 1500<? Oh and work?!?
Transmission
- Thread starter 13foxtrot
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dapepper9
Senior Member
- Joined
- Feb 7, 2013
- Posts
- 5,906
- Reaction score
- 2,227
- Location
- Iowa/Nebraska Border
- Ram Year
- 2001
- Engine
- 5.9L V8
I'm sure there's a way to do it but its gonna be a pia because 96 used an RH tranny and 01s used an RE tranny, they were slightly different and the REs used more electrical components, I'm not 100% sure what was different tho
dodge dude94
Millennial Boomer
- Joined
- Sep 5, 2013
- Posts
- 27,745
- Reaction score
- 6,429
- Location
- East Texas
- Ram Year
- 1998 Ram 1500
- Engine
- 5.9 Magnum
Don't bother.
Like, at all. It's too much work and will likely keep your truck down for a month.
Like, at all. It's too much work and will likely keep your truck down for a month.
Merc225hp
Senior Member
So I have a 46re in my 96 it would fit but you need to change out the solenoids to the 01 year style. So look at what tranny the 96 has before you get into this make sure it is the 46re.
OP
OP
13foxtrot
Junior Member
Ok thanks guys. I looked at the tranny in the 96 and it appears to be an RE I think it may have been swapped in the past
