Under Seat Wire taping

[mopar]

In my 2011 I ran my Head rest DVDs off of a (I tapped into this)2 wire connector under the drivers's seat. In my 2015 ram 2500I don't have the same connector. Can anyone point me 2 the two wires I should tap into. One is gound and one is switched 12v 7amp. Thanks in advance

Install instructions

http://blog.qualitymobilevideo.com/wp-content/uploads/2015/09/av7500-installation-manual.pdf

 

[SilverStreak88]

You can tap into a 12V in your under seat harness.

 

[mopar]

Any idea which ones?

 

[SilverStreak88]

Any idea which ones?

Sorry, I have no idea. You can get a test light and find a lead that lights up with the key in the on position and off in the off position.

 

[mopar]

OK i kinda figured on that for the 12v one... but how do you test for the ground wire?

 

[RedFalcon]

OK i kinda figured on that for the 12v one... but how do you test for the ground wire?

Typically grounds are the black wire, but it doesn't matter. You can just make a new ground. If you're going to be under the seat, just use one of the bolts that secure the seat to the frame and throw a ring terminal on it.