Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ok well I don't have pics of the actual install but I do have these pics of the new mirrors installed and pics of the replaced parts on the bed of my truck will this suffice?
I researched a lot of threads here in the forums of which there are plenty about this and on one of those threads a member that goes by KAD had a parts list which was very helpful he also recommended getting in contact with Benny from All Mopar Parts with VIN to make sure I get the right new door switch for drivers door, that apparently is something that changes between years, To answer the other question the mirrors are approx. 2'' wider in the normal position and approx. 4'' wider in the Up towing position.
ok well I don't have pics of the actual install but I do have these pics of the new mirrors installed and pics of the replaced parts on the bed of my truck will this suffice?View attachment 155170 View attachment 155171 View attachment 155172 View attachment 155173
maybe fold them in before you get all the way in??? just remember if you go to the power folding mirror you also need to replace the door modules in both sides, also there are support brackets to add like the factory does. Some people have added the mirrors with out them but they do weigh more than the standard mirrors and I've heard some say they experience some vibration of the mirror with out them.
Man all you lighting and wiring gurus. I need to get a bunch of lights added. Who works for beerAdded some under the rear seat lighting to my mega cab so I can find all the crap and food my kids drop under there!
View attachment 155183
LOL don't we allI have the folding mirrors now, just not the tow variety. What I really need is a different house with a better garage setup!
Man all you lighting and wiring gurus. I need to get a bunch of lights added. Who works for beer
I researched a lot of threads here in the forums of which there are plenty about this and on one of those threads a member that goes by KAD had a parts list which was very helpful he also recommended getting in contact with Benny from All Mopar Parts with VIN to make sure I get the right new door switch for drivers door, that apparently is something that changes between years, To answer the other question the mirrors are approx. 2'' wider in the normal position and approx. 4'' wider in the Up towing position.
Had one of my woofers on my PPI 3 ways stop working for some reason so purchased a set of Eric Stevens mb6-4 misbasses and then snooped around and picked up a set of Dayton rs100-4 4” midranges and Peerless soft dome tweeters. Next is grabbing a Dayton DSP-408 and run these things active. All this because a speaker stopped working.... smh.