Will they rub??

[jstacey8]

Right now I'm running a rcx 4 inch with bils at 2.1 and 4.5 rear coil spacer and running 37x13.5 nittos on 20x10 -12 fuel rims and I'm clearing them now but I want to push my bils up to 2.8 and add my 1.25 body lift and want to add some wheel spacers. I'd like 1.5 wheel spacers but will they rub?

 

[jstacey8]

Anyone have a guess?

 

[gassersarentdead]

I'm on a 6" zone with bilsteins maxed. 37x13.50x20 and 1.5" boras. Had to get this out.

 

[jstacey8]

I already have the lower air dam removed but I'll be adding about 2 inches to the front so im guessing I'll be able to fit inch wheel spacers but not really sure

 

[gassersarentdead]

I don't have my valance on either. Had to trim the inner plastic and a corner off the inside of the bumper on the passenger side. Drivers side was hitting the rear.

 

[Rzrman328]

Right now I'm running a rcx 4 inch with bils at 2.1 and 4.5 rear coil spacer and running 37x13.5 nittos on 20x10 -12 fuel rims and I'm clearing them now but I want to push my bils up to 2.8 and add my 1.25 body lift and want to add some wheel spacers. I'd like 1.5 wheel spacers but will they rub?

As I read this, all that came to mind was....


"If jimmy has 4 bananas and Jenny has 3 bananas....how many apples does bobby have?"

****, dude idk....just try it.

 

[jstacey8]

Well I don't wanna try and not have it not work and be out 300 for nothing

 

[gassersarentdead]

Everything can work

 

[Thatdude596]

why didn't u just buy a 6" lift

 

[jstacey8]

Got the lift for 400 new in boxes couldn't beat it

 

[gassersarentdead]

Go 3" body and then ya can, I'm guessing no with that setup.