Dubstep Shep
Senior Member
- Joined
- Aug 4, 2014
- Posts
- 2,240
- Reaction score
- 513
- Location
- Houston
- Ram Year
- 2014 R/T
- Engine
- 5.7L Hemi
Ladies and gentlemen, it's time we had a REAL tech thread on suspension and lowering for these trucks.
I proudly present to you, this thread:
In all seriousness, I figured I would share some of what I've learned in one place, rather than scattered through the forum.
I'll try to use this OP as an Index of the various posts that are good info. I'm going to reserve the first few right now to edit as I go on.
Post #2: My experience and problems with the Belltech 2/4
Post #3: Cutting OEM front springs vs. Crown Springs
Post #4: Problems with Spohn Arms and potential alternatives
Post #5: The basics of rear suspension geometry and real world results of different mods
Post #6: The basics of front suspension geometry and real world results of different mods
Post #7: My final solution to the rear suspension on my truck
Post #8: My final solution to the front suspension on my truck
EDIT: This thread is going to be a little bit of a living document as time goes on. Gonna take me at least a day or two just to get everything in here.
Anyone have a set of corner scales I can borrow? Happy to pay for shipping if you aren't local. I just need to verify some stuff and get some real world numbers...
I proudly present to you, this thread:
In all seriousness, I figured I would share some of what I've learned in one place, rather than scattered through the forum.
I'll try to use this OP as an Index of the various posts that are good info. I'm going to reserve the first few right now to edit as I go on.
Post #2: My experience and problems with the Belltech 2/4
Post #3: Cutting OEM front springs vs. Crown Springs
Post #4: Problems with Spohn Arms and potential alternatives
Post #5: The basics of rear suspension geometry and real world results of different mods
Post #6: The basics of front suspension geometry and real world results of different mods
Post #7: My final solution to the rear suspension on my truck
Post #8: My final solution to the front suspension on my truck
EDIT: This thread is going to be a little bit of a living document as time goes on. Gonna take me at least a day or two just to get everything in here.
Anyone have a set of corner scales I can borrow? Happy to pay for shipping if you aren't local. I just need to verify some stuff and get some real world numbers...
Last edited: