Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
which to be clear, in case there was confusion on OP's part, half tons have a Dana 44 and a Chrysler 9.25 in the rear. so you'd be able to go to a 4:10 ratio.Unless you have a Dana, there are no 3.73s
which to be clear, in case there was confusion on OP's part, half tons have a Dana 44 and a Chrysler 9.25 in the rear. so you'd be able to go to a 4:10 ratio.
Sent from my A0001 using Tapatalk
What all do you need to replace if you want to go from 3.55 to 3.73 gears