Wise
Member
I'm planning on getting the zone 6 inch lift with the 3 inch rear coils on my 1500 and trying to decide on 35s or 37s if anyone has some photos or advice they can share.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Correct me if I'm wrong but the 3 inch rear with no billsteins up front would make it level and if I went with the 5 inch rear I would have to adjusted them up to make it level.
This is correct. These trucks have aprox ~3" rake. Lifting front 6" and rear 3", would get you level. 6" with 5" rear would still leave ~2" rake. Thats where you would adj bils to 2.1 or 2.8 for close to level.
Keeps the truck from Bulldogging, or in non truck guy terms, front end doesnt aim up into the sky.
Your 6" lift is really 5.5" you can add bils in front to level the truck another 2-2.5". At this point the truck would be level. If you have rear coils and not blocks, I think you could stick a spacer back there. But, you would just be adding rake back in to the equation.
So are you saying I can put Bils on my 6" lift and get rear spacers with 2 more inches on the back, then will have an 8" lift. If so, that's going on my list. I really want a couple more inches of lift, but don't want to do a body lift.