What did you do with your 4th Gen this week?

[Ramdan32]

Installed weathertech mudflaps on the old girl. Tow hooks and new tires soon to follow.

View attachment 162397

View attachment 162398

New tires look so good

 

[oilslick]

I blacked out the chrome grille. I figured since I got rid of the chrome looking badges, I may as well do the grill. I'm not a chrome fan on Sport models.

 

[hodge-xj]

Extended my stock sway bar links. Made a noticeable difference. Rears came out perfect, front will get a version 2.0 in the near future.

Sent from my SM-N920V using Tapatalk

 

[WhiteKnight]

I blacked out the chrome grille. I figured since I got rid of the chrome looking badges, I may as well do the grill. I'm not a chrome fan on Sport models.View attachment 162530

I’m so disappointed in myself do not getting a sport! Lol


Sent from my iPhone using Tapatalk

 

[revitupmoto33]

Extended my stock sway bar links. Made a noticeable difference. Rears came out perfect, front will get a version 2.0 in the near future.

Sent from my SM-N920V using Tapatalk

I never thought about just cutting and extending them!! Nice work

 

[revitupmoto33]

Extended my stock sway bar links. Made a noticeable difference. Rears came out perfect, front will get a version 2.0 in the near future.

Sent from my SM-N920V using Tapatalk

How much did you add?

 

[circuitguy]

I had my roof wrapped in satin black today. What a great change it made to the truck. My wife liked it so much we scheduled her Challenger to be done tomorrow. Very professional job, they even removed the sat antenna so no cut lines or edges would be seen. Check it out!

 

[oilslick]

I had my roof wrapped in satin black today. What a great change it made to the truck. My wife liked it so much we scheduled her Challenger to be done tomorrow. Very professional job, they even removed the sat antenna so no cut lines or edges would be seen. Check it out!

View attachment 162568

View attachment 162569

View attachment 162570

Looks great! Especially on white.

 

[circuitguy]

Looks great! Especially on white.

I saw one on red, looked pretty good.

 

[hodge-xj]

How much did you add?

Exactly 1" to both the front and rear.

The fronts match perfectly to the 1/2" solid stock in diameter. The rears looked to be about 3/8", the 5/16 stuff I used was a bit small. I'll get you a length on them this afternoon.

Sent from my SM-N920V using Tapatalk

 

[viclava]

Just got her leveled..

 

[KiltedCelt01]

This morning, I installed a set of smoked LED license plate lights I ordered through eBay. Here’s the link if anyone is interested.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183442025807

It wasn’t a bad job, it took about 15-20 minutes. The metal retaining clips weren’t too difficult to get out but they fought me the entire time trying to get them back in. You just have to be patient and hold the lights tightly while reinstalling the clips.

These lights are set up like the OLED Recon taillights; the wire from the light plugs into the light socket where the OEM bulb goes and then the socket plugs right into the housing like the OEM does. I zip tied the modules up out of the way around the license plate light wiring harness.




This is the retainer clip. Look up under your rear bumper and you’ll see the gray metal edge of the clip that holds the light assembly in. I used a plastic pry tool to pull them out and they popped right out with a little prying.




(I tested each side before I reinstalled the clips) They work great and I really like the way they look.

Now I need to upgrade my reverse light bulbs so I can actually see behind me at night when backing up. Any suggestions?


Sent from my iPhone using Tapatalk

 

[hodge-xj]

This morning, I installed a set of smoked LED license plate lights I ordered through eBay. Here’s the link if anyone is interested.

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183442025807

It wasn’t a bad job, it took about 15-20 minutes. The metal retaining clips weren’t too difficult to get out but they fought me the entire time trying to get them back in. You just have to be patient and hold the lights tightly while reinstalling the clips.

These lights are set up like the OLED Recon taillights; the wire from the light plugs into the light socket where the OEM bulb goes and then the socket plugs right into the housing like the OEM does. I zip tied the modules up out of the way around the license plate light wiring harness.




This is the retainer clip. Look up under your rear bumper and you’ll see the gray metal edge of the clip that holds the light assembly in. I used a plastic pry tool to pull them out and they popped right out with a little prying.




(I tested each side before I reinstalled the clips) They work great and I really like the way they look.

Now I need to upgrade my reverse light bulbs so I can actually see behind me at night when backing up. Any suggestions?


Sent from my iPhone using Tapatalk

Just did these, they are awesome and I have no bulb out message.

Sent from my SM-N920V using Tapatalk

 

[KiltedCelt01]

Just did these, they are awesome and I have no bulb out message.

Sent from my SM-N920V using Tapatalk

Awesome. Thank you!


Sent from my iPhone using Tapatalk

 

[hodge-xj]

Awesome. Thank you!


Sent from my iPhone using Tapatalk

No problem! I spent alot of time sifting through the threads just to find a simple answer. They are 17$ on Amazon right now. Huge difference, to the point I don't feel the need to add led pods, eventually I will but these made a significant difference.

I'm trying to convert a few things to leds, did they have bulb replacement available for the license plate bulbs?

Sent from my SM-N920V using Tapatalk

 

[KiltedCelt01]

No problem! I spent alot of time sifting through the threads just to find a simple answer. They are 17$ on Amazon right now. Huge difference, to the point I don't feel the need to add led pods, eventually I will but these made a significant difference.

I'm trying to convert a few things to leds, did they have bulb replacement available for the license plate bulbs?

Sent from my SM-N920V using Tapatalk

The new ones I installed were the first thing I found for the license plate lights. As far as individual LED bulbs go, I found these.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/142893234567


There’s also complete LED assemblies without the tinted lens.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/192809871908


Sent from my iPhone using Tapatalk

 

[electricyeti]

I did the Luyed ones from Amazon. They work well. As far as extra back up lights, I just added the Putco blade, it's quite bright. I don't have a pic of it in reverse because I can no longer set the brake, put it in reverse and walk away. I'll get the wife to help tomorrow. The whole thing turns white. Clames over 2000 LEDs.

Sent from my Pixel 2 XL using Tapatalk

 

[stimpy433]

Dropped my truck off for a complete inside/outside detail and wax.

 

[JimsRamTruck2012]

Picked up the mirror for the 2012 yesterday. Will install tomorrow.

 

[ram1500rsm]

Just got her leveled..
View attachment 162600

Awesome. What’s the weight on the RTT?